Initial Setup Steps for Identity Provisioning with Xurrent IMR

This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to Xurrent IMR.

Note: For detailed instructions on operating Xurrent IMR, please refer to the documentation provided by Xurrent IMR.

Item Details
Pre-check
  • Xurrent IMR administrator privileges are required.
Setup Flow / Manual

Note: After connecting TrustLogin and Xurrent IMR using the steps on this page,
 please proceed to configuring user synchronization.

Provisioning Target Supports user provisioning
Supports group provisioning
SAML Authentication Setup Manual
Notes
  • None in particular

Setup Steps

Xurrent IMR Settings

  1. Log in to Xurrent IMR with administrator privileges, and click "Profile Icon > Account" in the upper right.

    Xurrent IMR_ID_03.png

  2. Click the "Single Sign-On" button.

    Xurrent IMR_ID_04.png

  3. Select the provider displayed under "Select SSO Provider".

    Xurrent IMR_ID_05.png

  4. Copy the displayed Base URL and Token to your clipboard.
    Note: The token cannot be viewed again after you "Save". Please make sure you have copied it before proceeding.

    Xurrent IMR_ID_09.png


    This completes the preparation on the Xurrent IMR side. Next, configure the settings on the TrustLogin side.

TrustLogin Settings

  1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
    open "Settings" next to "Identity Provisioning".
    IDProvServiceCommon01.png

  2. Click "Add Service".
    IDProvServiceCommon02.png
  3. On the Add Service screen, search for and select "Xurrent IMR", then click the "Add" button.
    Xurrent IMR_ID_16.png
  4. You will be redirected to the "Identity Provisioning > Xurrent IMR" page.
    Click the "Edit" button.
    Xurrent IMR_ID_17.png
  5. Open "Access Settings", enter the following values for the settings items, and click "Save".

    Connection URL The value of "Base URL" you copied in step 4 of Xurrent IMR Settings
    Access Token The value of "Token" you copied in step 4 of Xurrent IMR Settings

    Xurrent IMR_ID_11.png

  6. Click the "Connect" button in the upper right of the screen.
    NotConnected_IDProv.png
  7. Once the button status updates to "Connected", the initial setup is complete.
    Connected_IDProv.png

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

You can map any attribute on the TrustLogin side to any attribute on the Xurrent IMR side.
For configuration instructions, see here

Available Default Functions

Initial Setup Steps for Identity Provisioning with Xurrent IMR

This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to Xurrent IMR.

Note: For detailed instructions on operating Xurrent IMR, please refer to the documentation provided by Xurrent IMR.

Item Details
Pre-check
  • Xurrent IMR administrator privileges are required.
Setup Flow / Manual

Note: After connecting TrustLogin and Xurrent IMR using the steps on this page,
 please proceed to configuring user synchronization.

Provisioning Target Supports user provisioning
Supports group provisioning
SAML Authentication Setup Manual
Notes
  • None in particular

Setup Steps

Xurrent IMR Settings

  1. Log in to Xurrent IMR with administrator privileges, and click "Profile Icon > Account" in the upper right.

    Xurrent IMR_ID_03.png

  2. Click the "Single Sign-On" button.

    Xurrent IMR_ID_04.png

  3. Select the provider displayed under "Select SSO Provider".

    Xurrent IMR_ID_05.png

  4. Copy the displayed Base URL and Token to your clipboard.
    Note: The token cannot be viewed again after you "Save". Please make sure you have copied it before proceeding.

    Xurrent IMR_ID_09.png


    This completes the preparation on the Xurrent IMR side. Next, configure the settings on the TrustLogin side.

TrustLogin Settings

  1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
    open "Settings" next to "Identity Provisioning".
    IDProvServiceCommon01.png

  2. Click "Add Service".
    IDProvServiceCommon02.png
  3. On the Add Service screen, search for and select "Xurrent IMR", then click the "Add" button.
    Xurrent IMR_ID_16.png
  4. You will be redirected to the "Identity Provisioning > Xurrent IMR" page.
    Click the "Edit" button.
    Xurrent IMR_ID_17.png
  5. Open "Access Settings", enter the following values for the settings items, and click "Save".

    Connection URL The value of "Base URL" you copied in step 4 of Xurrent IMR Settings
    Access Token The value of "Token" you copied in step 4 of Xurrent IMR Settings

    Xurrent IMR_ID_11.png

  6. Click the "Connect" button in the upper right of the screen.
    NotConnected_IDProv.png
  7. Once the button status updates to "Connected", the initial setup is complete.
    Connected_IDProv.png

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

You can map any attribute on the TrustLogin side to any attribute on the Xurrent IMR side.
For configuration instructions, see here

Available Default Functions