Initial Setup Steps for Identity Provisioning with Jostle

GMOトラスト・ログインチーム
  • Updated

This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to Jostle.

Note: For detailed instructions on operating Jostle, please refer to the documentation provided by Jostle.

Item Details
Pre-check
  • Jostle administrator privileges are required.
Setup Flow / Manual

Note: After connecting TrustLogin and Jostle using the steps on this page,
　please proceed to configuring user synchronization.
Provisioning Target 〇 Supports user provisioning
ー Supports group provisioning
SAML Authentication Setup Manual －
Notes
  • None in particular

Setup Steps

Jostle Settings

  1. Log in to Jostle with administrator privileges, and click "Admin Settings".

    [Jostle]_ID_01.png

  2. Click "User Management Provisioning".

    [Jostle]_ID_02.png

  3. Click "Add a new key…".

    [Jostle]_ID_03.png

  4. Enter and select "Automation User".

    Note: If the relevant user does not appear, click "create a new automation user" and follow the on-screen instructions to create one.

    [Jostle]_ID_04.png

  5. Enter any name in "Provisioning API key description", and click "Add".

    [Jostle]_ID_05.png

  6. Copy the displayed "API key" to your clipboard.
    Note: The token cannot be viewed again after you "Save". Please make sure you have copied it before proceeding.

    [Jostle]_ID_06.png

    This completes the preparation on the Jostle side. Next, configure the settings on the TrustLogin side.

TrustLogin Settings

  1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
    open "Settings" next to "Identity Provisioning".
    IDProvServiceCommon01.png

  2. Click "Add Service".
    IDProvServiceCommon02.png

  3. On the Add Service screen, search for and select "Jostle", then click the "Add" button.

    [Jostle]_ID_07.png

  4. You will be redirected to the "Identity Provisioning > Jostle" page.
    Click the "Edit" button.

    [Jostle]_ID_08.png

  5. Open "Access Settings", enter the following values for the settings items, and click "Save".

    API Key The value of "API Key" you copied in step 6 of Jostle Settings

    [Jostle]_ID_09.png

  6. Click the "Connect" button in the upper right of the screen.
    NotConnected_IDProv.png

  7. Once the button status updates to "Connected", the initial setup is complete.
    Connected_IDProv.png

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

You can map any attribute on the TrustLogin side to any attribute on the Jostle side.
For configuration instructions, see here

Available Default Functions

Was this article helpful?
  1. ホーム
  2. Identity Provisioning - Service Settings
  3. Initial Setup Steps for Identity Provisioning with Jostle

Initial Setup Steps for Identity Provisioning with Jostle

GMOトラスト・ログインチーム
  • Updated

This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to Jostle.

Note: For detailed instructions on operating Jostle, please refer to the documentation provided by Jostle.

Item Details
Pre-check
  • Jostle administrator privileges are required.
Setup Flow / Manual

Note: After connecting TrustLogin and Jostle using the steps on this page,
　please proceed to configuring user synchronization.
Provisioning Target 〇 Supports user provisioning
ー Supports group provisioning
SAML Authentication Setup Manual －
Notes
  • None in particular

Setup Steps

Jostle Settings

  1. Log in to Jostle with administrator privileges, and click "Admin Settings".

    [Jostle]_ID_01.png

  2. Click "User Management Provisioning".

    [Jostle]_ID_02.png

  3. Click "Add a new key…".

    [Jostle]_ID_03.png

  4. Enter and select "Automation User".

    Note: If the relevant user does not appear, click "create a new automation user" and follow the on-screen instructions to create one.

    [Jostle]_ID_04.png

  5. Enter any name in "Provisioning API key description", and click "Add".

    [Jostle]_ID_05.png

  6. Copy the displayed "API key" to your clipboard.
    Note: The token cannot be viewed again after you "Save". Please make sure you have copied it before proceeding.

    [Jostle]_ID_06.png

    This completes the preparation on the Jostle side. Next, configure the settings on the TrustLogin side.

TrustLogin Settings

  1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
    open "Settings" next to "Identity Provisioning".
    IDProvServiceCommon01.png

  2. Click "Add Service".
    IDProvServiceCommon02.png

  3. On the Add Service screen, search for and select "Jostle", then click the "Add" button.

    [Jostle]_ID_07.png

  4. You will be redirected to the "Identity Provisioning > Jostle" page.
    Click the "Edit" button.

    [Jostle]_ID_08.png

  5. Open "Access Settings", enter the following values for the settings items, and click "Save".

    API Key The value of "API Key" you copied in step 6 of Jostle Settings

    [Jostle]_ID_09.png

  6. Click the "Connect" button in the upper right of the screen.
    NotConnected_IDProv.png

  7. Once the button status updates to "Connected", the initial setup is complete.
    Connected_IDProv.png

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

You can map any attribute on the TrustLogin side to any attribute on the Jostle side.
For configuration instructions, see here

Available Default Functions