This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to PHONE APPLI PEOPLE.

Note: For detailed instructions on operating PHONE APPLI PEOPLE, please refer to the manual provided by PHONE APPLI PEOPLE.

Setup Steps

PHONE APPLI PEOPLE Settings

1. Log in to PHONE APPLI PEOPLE with administrator privileges, and click "User Information" from the user icon in the upper right.
   
2. Select the "API Key" tab (API Key).
   
   

3. Proceed to issue the API key.
   Enter a key name in the field at the bottom of the screen, and check the following permissions.

   • User.Write
   • User.Read
   • ExtarnalContacts.Write
   • PhoneNumContact.Read
   • CallHistory.Write
   • Destination.Write
   • Paplace.Write
   • PaThanks.Write

   
   

4. Click the "Issue" button.
   
   
5. The API key will be issued, so make a copy of it. (You will use this later in the TrustLogin settings)
   
   
   
   
   This completes the preparation on the PHONE APPLI PEOPLE side. Next, configure the settings on the TrustLogin side.
   

TrustLogin Settings

1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
   open "Settings" to the right of "Identity Provisioning".
   
   

2. Click "Add Service".
   
   
   
3. On the Add Service screen, search for and select "PHONE APPLI PEOPLE", then click the "Add" button.
   
   
4. You will be redirected to the "Identity Provisioning > PHONE APPLI PEOPLE" page.
   Click the "Edit" button.
   
   
   

5. Open "Access Settings", enter the following value for the settings item, and click "Save".

   API Key

   PHONE APPLI PEOPLE Settings The API key value you copied in Step 5

   
   

6. Click the "Connect" button in the upper right of the screen.
   
   

7. Once the button status updates to "Connected", the initial setup is complete.
   
   

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

You can map any attribute on the TrustLogin side to any attribute on the PHONE APPLI PEOPLE side.
For configuration instructions, see here

Available Default Functions

• default functions common to all services can be specified.