This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to Domo.

Note: For detailed instructions on operating Domo, please refer to the manual provided by Domo.

Setup Steps

Domo Settings

1. Log in to Domo, and go to "Admin ＞ Authentication ＞ API Client".
   
2. Click "CREATE (Create)".
   
   

3. On the API client creation screen, configure the following settings, and close the screen by clicking "CLOSE".

   Name	Enter any name
   Description	Enter any description
   Scope	Select any scope (in this procedure, "Data" and "User" are selected)
   Client ID	Copy this value
   Client Secret	Copy this value (it cannot be displayed again. Please make sure you have copied it before proceeding)

   
   
   
   This completes the preliminary preparation on the Domo side. Next, configure the settings on the TrustLogin side.
   

TrustLogin Settings

1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
   open "Settings" next to "Identity Provisioning".
   

1. Click "Add Service".
   
   
   
2. Search for "Domo", select it, and click the "Add" button.
   
   
3. You will be redirected to the "Identity Provisioning ＞ Domo" page.
   Click the "Edit" button.
   
   

4. Open "Access Settings", enter the following values for each setting item, and click "Save".

   Client ID	Domo Settings ＞ The "Client ID" you copied in step 4
   Client Secret	Domo Settings ＞ The "Client Secret" you copied in step 4

   
   

5. Click the "Connect" button.
   
   

6. Once the button status updates to "Connected", the initial setup is complete.
   
   

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

The following values can be specified as Domo's default functions.

Note: For an overview of the attribute mapping feature and configuration instructions, please see here.