This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to DirectCloud.

Note: For detailed instructions on operating DirectCloud, please refer to the documentation provided by DirectCloud.

Setup Steps

DirectCloud Settings

1. Log in to DirectCloud with administrator privileges.
   Make a note of the Company ID. (This will be used in the TrustLogin settings.)
   
2. From the menu, go to "Environment Settings > Custom Settings".
   
   
3. Scroll down the screen, and in the "DirectCloud API" section,
   check whether the "Use" radio button for "DirectCloud API" is selected.
   Note: If "Do not use" is selected, please select "Use".
   
   

4. Among the keys shown in the "API Key" section, make a note of the "Service" and
   "Service Key" values for the "Administrator" type. (These will be used in the TrustLogin settings.)
   

   Note: If you changed the "Use/Do not use" setting for "DirectCloud API" in step 2, save your changes using the "Save" button.
   
   
   This completes the preparation on the DirectCloud side. Next, configure the settings on the TrustLogin side.
   

TrustLogin Settings

1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
   open "Settings" next to "Identity Provisioning".
   
   
   

2. Click "Add Service".
   
   
   
3. Search for and select "DirectCloud", then click the "Add" button.
   
   
4. You will be redirected to the "Identity Provisioning > DirectCloud" page.
   Click the "Edit" button.
   
   

5. Open "Access Settings", enter the following values for the setting items, and click "Save".

   Company ID	DirectCloud Settings > the Company ID of DirectCloud you noted in step 1
   Service Name	DirectCloud Settings > the "Service" value you noted in step 4
   Service Key	DirectCloud Settings > the "Service Key" value you noted in step 4 (hidden after saving)
   Login Name	DirectCloud user ID
   Password	Password of the DirectCloud user (hidden after saving)

   
   
   

6. Click the "Connect" button.
   
   

7. Once the button status updates to "Connected", the initial setup is complete.
   
   

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

The following values can be specified as default functions for DirectCloud.

Note: For an overview of the attribute mapping feature and configuration instructions, see here.