Initial Setup Steps for Identity Provisioning with Amiya Verona

GMOトラスト・ログインチーム
  • Updated

This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to Amiya Verona.

Note: For detailed instructions on operating Amiya Verona, please refer to the manual provided by Amiya Verona.

Item

Details

Pre-check
  • You must be able to log in to Amiya Verona.

Setup Flow / Manual

Note: After connecting TrustLogin and Amiya Verona using the steps on this page,
　please proceed to configuring user synchronization.

Provisioning Target

〇

 Supports user provisioning

〇

 Supports group provisioning

SAML Authentication Setup Manual

How to Configure SAML JIT for Verona Client (Verona Cloud Console)

  • The Identity Provisioning configuration created in this procedure can be linked to an existing SAML app.
    For details on the SAML app configuration, seehere.
  • To prevent conflicts in user attribute updates caused by using Identity Provisioning together with SAML JIT,
    we recommend not configuring the "SAML attribute settings" for duplicate user attributes when creating a SAML app.
    Note: Behavior depends on the service specifications, so please check with each SP for details.

Notes
  • None in particular

Setup Steps

Amiya Verona Settings

  1. Log in to Amiya Verona, and from the menu on the left side of the screen, go to "Owner > Owner".
    verona_IDProv_01.png
  2. On the "Edit Owner" screen, click the "User Provisioning" tab.
    verona_IDProv_02.png
  3. Set "Provisioning" to "Enabled" and click the "Update" button.
    verona_IDProv_09.png
  4. Copy the tenant URL. (This will be used in the TrustLogin settings.)
    verona_IDProv_10.png
  5. Click the "Issue" button for the SCIM secret token. (If one has already been issued, click the "Reissue" button instead.)
    verona_IDProv_11.png
  6. Click "Yes" on the confirmation screen.
    verona_IDProv_08.png
  7. Copy the displayed "SCIM Secret Token" and click "Close". (This will be used in the TrustLogin settings.)
    Note: The token cannot be viewed again after clicking "Close". Please make sure you have copied it before proceeding.
    verona_IDProv_12.png
  8. The token will be registered.
    verona_IDProv_13.png
    This completes the preparation on the Amiya Verona side. Next, configure the settings on the TrustLogin side.

TrustLogin Settings

  1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
    open "Settings" next to "Identity Provisioning".
    IDProvServiceCommon01.png

  2. Click "Add Service".
    IDProvServiceCommon02.png

  3. Search for "Amiya", select it, and click the "Add" button.
    verona_IDProv_03.png
  4. You will be redirected to the "Identity Provisioning > Amiya" page.
    Click the "Edit" button.
    verona_IDProv_04.png

  5. Open "Access Settings", enter the following values for each setting item, and click "Save".

    Connection URL The tenant URL you copied in step 4 of Amiya Verona Settings
    Access Token The token you issued and copied in step 4 of Amiya Verona Settings

    verona_IDProv_05.png

  6. Click the "Connect" button.
    verona_IDProv_06.png

  7. Once the button status updates to "Connected", the initial setup is complete.
    verona_IDProv_07.png

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

The values that can be specified as Amiya Verona's default functions are as follows.

Value Description
Full Name This is the full name with the surname first.
Full Name (Given Name First) This is the full name with the given name first.
Username from Email Retrieves the portion of the email address before the "@" and limits it to a maximum of 21 characters.

Note: For an overview of the attribute mapping feature and how to configure it, please see here.


Was this article helpful?

Related articles

  1. ホーム
  2. Identity Provisioning - Service Settings
  3. Initial Setup Steps for Identity Provisioning with Amiya Verona

Initial Setup Steps for Identity Provisioning with Amiya Verona

GMOトラスト・ログインチーム
  • Updated

This page describes the initial setup steps for using TrustLogin as the source of identity
to perform Identity Provisioning to Amiya Verona.

Note: For detailed instructions on operating Amiya Verona, please refer to the manual provided by Amiya Verona.

Item

Details

Pre-check
  • You must be able to log in to Amiya Verona.

Setup Flow / Manual

Note: After connecting TrustLogin and Amiya Verona using the steps on this page,
　please proceed to configuring user synchronization.

Provisioning Target

〇

 Supports user provisioning

〇

 Supports group provisioning

SAML Authentication Setup Manual

How to Configure SAML JIT for Verona Client (Verona Cloud Console)

  • The Identity Provisioning configuration created in this procedure can be linked to an existing SAML app.
    For details on the SAML app configuration, seehere.
  • To prevent conflicts in user attribute updates caused by using Identity Provisioning together with SAML JIT,
    we recommend not configuring the "SAML attribute settings" for duplicate user attributes when creating a SAML app.
    Note: Behavior depends on the service specifications, so please check with each SP for details.

Notes
  • None in particular

Setup Steps

Amiya Verona Settings

  1. Log in to Amiya Verona, and from the menu on the left side of the screen, go to "Owner > Owner".
    verona_IDProv_01.png
  2. On the "Edit Owner" screen, click the "User Provisioning" tab.
    verona_IDProv_02.png
  3. Set "Provisioning" to "Enabled" and click the "Update" button.
    verona_IDProv_09.png
  4. Copy the tenant URL. (This will be used in the TrustLogin settings.)
    verona_IDProv_10.png
  5. Click the "Issue" button for the SCIM secret token. (If one has already been issued, click the "Reissue" button instead.)
    verona_IDProv_11.png
  6. Click "Yes" on the confirmation screen.
    verona_IDProv_08.png
  7. Copy the displayed "SCIM Secret Token" and click "Close". (This will be used in the TrustLogin settings.)
    Note: The token cannot be viewed again after clicking "Close". Please make sure you have copied it before proceeding.
    verona_IDProv_12.png
  8. The token will be registered.
    verona_IDProv_13.png
    This completes the preparation on the Amiya Verona side. Next, configure the settings on the TrustLogin side.

TrustLogin Settings

  1. Log in to the TrustLogin Admin Page, and from the "Admin Page > Settings > Optional Features" menu,
    open "Settings" next to "Identity Provisioning".
    IDProvServiceCommon01.png

  2. Click "Add Service".
    IDProvServiceCommon02.png

  3. Search for "Amiya", select it, and click the "Add" button.
    verona_IDProv_03.png
  4. You will be redirected to the "Identity Provisioning > Amiya" page.
    Click the "Edit" button.
    verona_IDProv_04.png

  5. Open "Access Settings", enter the following values for each setting item, and click "Save".

    Connection URL The tenant URL you copied in step 4 of Amiya Verona Settings
    Access Token The token you issued and copied in step 4 of Amiya Verona Settings

    verona_IDProv_05.png

  6. Click the "Connect" button.
    verona_IDProv_06.png

  7. Once the button status updates to "Connected", the initial setup is complete.
    verona_IDProv_07.png

Next step: The manual for configuring user synchronization is available here

Values You Can Configure in Attribute Mapping

The values that can be specified as Amiya Verona's default functions are as follows.

Value Description
Full Name This is the full name with the surname first.
Full Name (Given Name First) This is the full name with the given name first.
Username from Email Retrieves the portion of the email address before the "@" and limits it to a maximum of 21 characters.

Note: For an overview of the attribute mapping feature and how to configure it, please see here.


Related articles